The EM-Tec C-Square multi pin stub holders are primarily designed to hold multiple \u00d812.7mm and\/or \u00d825.4mm pin stubs with the standard 3.2mm pin diameter. Larger or smaller pin stubs can also be used on the EM-Tec C-Square multi pin stub holders. They offer optimum X-Y coverage of the SEM stage and allow for easy alignment with the square sides and additionally engraved lines in X-Y directions. To facilitate quick and easy loading and exchange of the pin stubs, proprietary conductive gripping O-rings hold the pin stubs in place and provide a conductive path at the same time. The EM-Tec C-Square multi pin stub holders are available in 7 different sizes:_x000D_
– EM-Tec CS9\/4 C-Square multi pin stub holder for 9x \u00d812.7mm or 4 x \u00d825.4mm pin stubs_x000D_
– EM-Tec CS16\/4 C-Square multi pin stub holder for 16x \u00d812.7mm or 4 x \u00d825.4mm pin stubs_x000D_
– EM-Tec CS18\/6 C-Square multi pin stub holder for 18x \u00d812.7mm or 6 x \u00d825.4mm pin stubs_x000D_
– EM-Tec CS25\/4 C-Square multi pin stub holder for 25x \u00d812.7mm or 4 x or 9 x \u00d825.4mm pin stubs_x000D_
– EM-Tec CS36\/9 C-Square multi pin stub holder for 36x \u00d812.7mm or 9 x \u00d825.4mm pin stubs_x000D_
– EM-Tec CS49\/9 C-Square multi pin stub holder for 49x \u00d812.7mm or 9 x \u00d825.4mm pin stubs_x000D_
– EM-Tec CS64\/16 C-Square multi pin stub holder for 64 x \u00d812.7mm or 16 x \u00d825.4mm pin stubs_x000D_
_x000D_
Feature and benefits of the EM-Tec C-Square multi pin stub holders:_x000D_
– Conductive pin gripping O-rings for quick and easy exchange of stubs_x000D_
– Compatible with standard pin stubs and short Zeiss pin stubs with 3.2mm pin diameter_x000D_
– Square holders optimised for X-Y travel directions_x000D_
– Reference point in the upper right corner_x000D_
– Easy programmable locations_x000D_
– Alphanumeric location ID_x000D_
– Engraved orientation lines to facilitate X-Y alignment_x000D_
– Fully compatible with all EM-Tec SEM stage adapters_x000D_
_x000D_
– Ideal for automated SEM\/EDX particle analysis and GSR analysis_x000D_
– Suitable for correlative & corroborative microscopy applications_x000D_
_x000D_
The EM-Tec C-Square multi pin stub SEM holders are available with:_x000D_
– standard pin to fit on SEM which use the standard pin; FEI, Philips, Tescan, Phenom, Pemtron, Aspex, RJLee, AmRay,\u00a0 Cambridge Instruments, Leica, CamScan, ETEC and Novascan SEMs._x000D_
– M4 threaded hole compatible with Hitachi SEMs, FESEMs and table top SEMs and with the EM-Tec versatile SEM stage adapters_x000D_
– \u00d814mm JEOL stub compatible with JEOL and EM-Tec stage adapters with a \u00d814mm connection<\/p>\n","protected":false},"excerpt":{"rendered":"