Apiezon Grease; Type M

1,00 €

Similar to grease type L, but it contains more wax. Grease M has an estimated vapor pressure @ 20°C of 2×10-9 torr, higher than Type L. Type M is recommended for applications where a grease of moderately low vapor pressure is required; such as for sealing ground joints on the backing side of oil diffusion pumps.

MSDS

Technical data sheet

 

UGS : 6070-235131 Catégories : , , ,

Description

Excellent lubricants High purity, low vapor pressure – non-contamination in analysis The working temperature range of each grease is dependent on the grade that is used Easily applied, easily cleaned off Silicone free. This benefits scientific users because the risk of sample contamination and consequently the risk of interference in analytical techniques such as infra-red or mass spctrometry, etc. is avoided Approved by NASA and NATO
Typical Property AP101 AP100 H L M N T
Main area of application General Lubricating Cryogenic High Temp High Vacuum General Vacuum Medium Temp
Melting Point: °C ASTM.D 566  °F
>200 >392
42-52 108-126 does not melt 42-52 108-126 40-60 104-140 42-52 108-126 112-137 233-278
Working temp. range -40-180 -40-365 10-30 50-86 -10-240 14-464 10-30 50-86 10-30 50-86 -269-30 -452-86 10-120 50-248
Vapor Pressure Torr @20°C <1.0x10-5 7.0×10-11 1.7×10-9 7×10-11 1.7×10-9 6×10-10 4.6×10-9
Relative Density 20°C 0.981 1.042 0.918 0.896 0.894 0.911 0.912
Radiation Resistance No No No Yes Yes No No
Outgassing Characteristics  TML ASTMS .E         CVCM 595-90 / / <1.0% <0.1% <1.0% <0.1% / / <1.0% <0.1% / / / /
Lubricity 4 Ball Test ASTM .D 2763 (IP 239), Kg 450 450 250 150 140 150 /
Viscosity of molten grease, cP 50°C 100°C / / / / / / 766 62.3 413 29.8
Coefficient of expansion per °C over 20°C-30°C 0.00066 / / 0.00076 0.00075 0.00072 0.00073
Thermal conductivity, w/m°C / / / / / / 0.216 / 0.194 / 0.194 0.095 / /
Latent heat of fusion, cal/g / / / 15.1 18.7 15.0 /
Fusion Peak °C / / 25 32 34 31 *
Vol. resistivity, cm / / / 1.2×1016 2.6×1016 2.0×1016 3.3×1016
Permittivity / / / 2.3 2.1 2.3 2.3
Loss tangent / / / <0.0001 <0.0001 <0.0001 <0.0001
Surface breakdown at flash over, kV / / / 24 28 27 24
Electric strength, V / / / 730 850 820 730
* Too close to room temperature to measure. PDF