EM-Tec V22 compact vise type sample holder for up to 22mm, M4

1,00 €

each

UGS : 12-000300 Catégories : , ,

Description

EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm with M4 thread. One fixed jaw and a spindle driven moving jaw. Jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws._x000D_ _x000D_ Description_x000D_ _x000D_ The EM-Tec V22 compact vise clamp includes a knurled brass knob to move the spindle screw for opening and_x000D_ closing this compact vise clamp. Available with either the standard 3.2mm pin or an M4 threaded hole for mounting_x000D_ on the SEM sample stage or on the EM-Tec SEM stage adapter with M4 screw_x000D_ _x000D_ Operation_x000D_ _x000D_ Consider wearing gloves to avoid contamination._x000D_
    _x000D_
  • To open the EM-Tec V22 compact vise type holder, rotate the knurled brass knob at the front of the holder._x000D_ Turning the knurled brass knob anti-clockwise will open the jaws; the moving jaw moves towards the back.
    • _x000D_
  • Place the sample in the opening (up to 22mm).
    • _x000D_
  • To close the jaws, turn the knurled brass knob clockwise and clamp the sample. Be careful not to overtighten_x000D_ the screw.
    • _x000D_
_x000D_ Even very thin samples can be securely held in the EM-Tec V22 compact vise type sample holder. For delicate_x000D_ samples, consider lining the jaws with EM-Tec conductive soft jaw lining kit; D12-003207_x000D_ _x000D_ Spécifications _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
Maximum clamping capacity between vise jaws:22mm
Dimensions closed (w/o pin):39 x 25 x 22mm
Dimensions fully opened (w/o pin):61 x 25 x 22mm
SEM stage compatibility   – standard pin: D12-000200
                                              – EM-Tec stage adapters M4 D12-000300
                                              – Hitachi M4 D12-000300
Material for compact vise type holder:Vacuum grade aluminium
Material for spindle:Low friction brass
Materials for screws:Anti-magnetic stainless steel
_x000D_ Maintenance_x000D_ _x000D_ The EM-Tec V22 compact vise clamp is maintenance free. Do not use oil or grease on the screw or brass spindle; this will cause contamination in the SEM. Do not allow debris to accumulate underneath the sliding vise jaw.

Informations complémentaires

Marque compatible

Hitachi

Produits similaires