Thin Bar Grids / grilles 1500 Mesh ( Cu, Ni) – Revolutionary Specimen Support Grids -Square Mesh – Gilder

Description

A reliable support specimen grid source. Features: well-defined grid bars, maximum open area, and a matte/shiny side. Each grid is individually inspected. Newly introduced are copper grids with palladium plating. This plating offers better grid strength and avoids tarnishing. Also new are Copper-Rhodium (Cu-Rh) grids in mesh sizes 200 and 300._x000D_ _x000D_  _x000D_ _x000D_ New Revolutionary Specimen Support Grids_x000D_ In addition to our square and hexagonal mesh Gilder Thin Bar Grids, we are now able to produce a very fine mesh that values up to 2,000 lines/inch. There is an increasing need in TEM for support thin films, routinely carbon, as thin as 1.5 – 2.0nm. The pitch (the distance from the center of one bar to the center of the next bar) dimension in all grids remains constant, which allows them to be used as a lower magnification calibration aid._x000D_ Type T601H(hexagonal) and T601(square) represent our efforts to reduce the grid bar width (only 5 microns) enabling more of the specimen to be viewed. All new types, apart from one side being shiny, the other matte, have a large asymmetrical mark in the rim which gives the identification of which side the specimen is on. Grids are 3.05mm overall diameter; 2.05mm mesh area diameter._x000D_ _x000D_ 3.05 diameter, 0.8 mil thickness_x000D_ Material: Copper(Cu), Nickel(Ni), Gold(Au)_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_

Type	Cat#	Packed	Pitch (µm)	Hole (µm)	Bar (µm)
600 mesh_x000D_ _x000D_ Square	DT601-Cu	100/vial	42	37	5
	DT601-Ni	100/vial	42	37	5
600 mesh_x000D_ _x000D_ Hexagonal	DT601H-Cu	100/vial	42	37	5
	DT601H-Ni	100/vial	42	37	5
1500 mesh_x000D_ _x000D_ Square	DT1500-Cu	15/vial	16.5	11.5	5
	DT1500-Ni	15/vial	16.5	11.5	5
2000 mesh_x000D_ _x000D_ Square	DT2000-Cu	10/vial	12.5	7.5	5
	DT2000-NI	10/vial	15.5	7.5	5

_x000D_ N’hésitez pas à nous contacter si vous souhaitez des informations supplémentaires ou un autre produit._x000D_ _x000D_