Description
The Em-Tec multiple pin stub holders are an efficient and cost-effective way to load multiple pin stubs with specimens in the SEM. Saves time, allows multi sample processing or quickly comparing samples against each other. Intended for holding the standard 12.7mm (1/2”) pin stubs, although the larger 25.4mm (1”)pin stubs can be used on the holders for 6 pin stubs or more. All the positions on the EM-Tec multiple pin stub holders for 6 pin stubs or more are numbered for easy identification and. Pin stubs are securely held with small M3 stainless steel set screws for the multi pin stub holders up to 12 pin stubs; an allen key is included. On the 29 and 49 multi pin stub holders, the pin stubs are held with an integrated stainless steel spring. The 6 and 8 multi pin holders comprise engraved crossed lines to assist with directional navigation. They are all made from vacuum grade aluminium and have undergone a final cleaning step which results in a satin surface finish. Available with:_x000D_
– standard pin to fit on SEMs which use the standard pin; FEI, Philips, Tescan, Phenom, Aspex, RJLee, AmRay, Cambridge Instruments, Leica, CamScan, Aspex, ETEC and Novascan SEMs_x000D_
– M4 threaded hole; compatible with Hitachi SEMs, FESEMs and table top SEMs and with the EM-Tec versatile SEM stage adapters_x000D_
– 32mm JEOL SEM stub format, compatible with 32mm stub holders on JEOL SEMs_x000D_
_x000D_
Additionally there are two 45 degrees pre-tilt multi-pin holders available:_x000D_
– 3 x 45° pin stub holders_x000D_
– 6 x 45° pin stub holders_x000D_
_x000D_
Both with pin and M4 threaded hole._x000D_
Special version for 7 x 25.4mm pin stubs is available as well: EM-Tec P7
